|
In this file you will find all the necessary information required
to browse through the CD.
Contents:
To start click "indexopen.exe".
Hardware Requirements:
Minimum: Pentium III (128 MB RAM)
Recommended: Pentium III and above (256 MB RAM)
Display Properties:
Minimum: 1024 by 768 High Color (16 Bit)
Recommended: 1024 by 768 True Color (24 Bit)
Software Requirements
This CD presentation mainly contains the files of type HTML,
MPEG only.
Browsers Required: IE 5.0 and above
MPEG Movie Player:
Windows
Media Player
|
| How to use the CD: |
|
Insert
your AIT TETRAWAMA CD into the drive. After a few seconds the autorun function will run the indexopen.exe
file.
Note
If
the autorun does not function, follow the following instructions:
First, ensure that the CD is inserted in the right manner with the
data surface (silver portion) facing downwards.
If the problem persists, check if the autorun function is enabled.
To do so go to the Control Panel by double clicking
on the My Computer icon.
Double-click on the System icon and select the Device
Manager tab. Now highlight the CD-ROM option
and click on the Properties button.
Once you have done that click on the Settings tab
and ensure whether the Auto insert notification box
is checked. If it isn’t check it right away and click OK to
end the process. You may have to restart your computer for the effects
to take place. If the problem still continues try running
indexopen.exe
from Windows Explorer.
Else try cleaning the CD with any common solvent and then play it.
If the problem persists check the CD-ROM drive for dust particles.
|
| Installing Software: |
For Microsoft
Internet Explorer
-
Follow these steps to install a program from the CD.
1.Click the program of your choice to go to its description. To
start the installation click on the install button.
2. You'll get the dialog box shown here:
Choose "Run this program from its current location" from this box.
3. Depending on how you have set up Internet Explorer, you may or
may not see a security warning message. If you do, choose "Yes" to
continue running the program.
4. The program install begins. If the file you are installing is a
self extracting file then extract all the files in it to a temporary
folder, say C:\Windows\Temp. Or you can create a folder and specify
the folder location before unzipping the files.
5. Open Windows Explorer and go to the folder where you have extracted
the program. Click on the Setup icon or setup.exe (or install.exe)
here. The installation starts and follow the instructions that come
up.
|
|
|
|
The
CDcan be viewed under the following display settings:
1024 x 768 pixels, high color (16 bit) with 32 MB RAM (recommended).
To
change your display settings
1.Click on the Start button and select Settings >
Control Panel from the menu.
2. Double click on the Display icon in the Control Panel
window to open the Display Properties window.
3.Choose the Settings tab in the Display Properties
window.
4.In the Colour Palette field , select any one of the two
colour palettes.
5.In the Desktop area, move the slider to select any one
of the above mentioned pixel settings.
6.Click Apply/OK to save the changes.
You may have to restart your computer for the changes to take place.
|
|
|
|
|
